1/2 in. Stud Dual Flex Engine Mount
4" Mounting Hole Centers DF-2200 Series 750 lb Max
The "Dual Flex" Marine Engine Mount design provides outstanding vibration isolation control across the three (longitudinal, lateral, and vertical) fields of vibratory motion.
Construction of the mount gives a soft cushioning effect under normal loads, but as mount loads increase across the operating range, shear resistance increases rapidly providing smooth operation with only a small amount of deflection.
The DF-2200 Series features heavy duty aluminum alloy construction with a lip incorporated in the top of the casting to resist the upward pull of the engine.
A durable oil and fuel resistant elastomer element is raised above top of the casting to accommodate engine mounting angles.
Size recommendations are based on engine plus powertrain weight with four-point mounting
Be sure to verify that the minimum clearance of 2-3/8" is suitable for your application
Threaded stud offers vertical adjustment of approximately 0.8 inches minus the thickness of the engine foot
The threaded stud is equipped with a leveling nut and two hex jam/locking nuts
Constructed with no metal-to-metal contact between supporting and mounting members
Fail safe design - a bottom pad prevents excessive impact
Aluminum base cast with 3/8" slotted holes for 3/8" bolts or lag screws
All steel parts are zinc dichromate plated for corrosion resistance
Suggested application charts available on request
Made in USA